12/29/2022 0 Comments 2 tone rtty![]() Use the top button on the left to enable or disable AFC Select the correct soundcard channel ( Left or Right) one whose input is connected to a sub-receiver or second receiver. Select the same soundcard specified in the PSK & RTTY Reception panel on the Configuration window's Soundcard tab, in which case the 2Tone and MMTTY demodulators will decode the same RTTY signals In the Receive Settings panel, select the soundcard from which 2Tone should decode RTTY you can The file 2Tone contains 2Tone version 15.05a, which runs on all versions of Windows The file 2Tone64 2102a contains 2Tone version 21.02a for 64-bit systems, only runs on Windows version 8 or 10, and requires a PC whose CPU supports AVX instructions to check your CPU, download and run the CPU-Z application, and inspect the CPU tab's Instructions section for the presence of AVX The file 2Tone32 2102a contains 2Tone version 21.02a for 32-bit systems, and only runs on Windows version 8 or 10 If running WinWarbler 9.3.7 or later, set the 2Tone filename selector to the version of 2Tone you wish to utilize ![]() ![]() ![]() To have the 2Tone demodulator decode RTTY into a Receive pane separate from the Receive pane displaying RTTY decoded by the MMTTY engine, In the MMTTY Engine window panel, uncheck the enabled box Set the FSK Control as required by the FSK connection If transmitting via FSK, then in the FSK sub-panel Set the Xcvr Mode selector to LSB (note: some transceivers provide a PKT or DATA mode that must be used if the soundcard audio output is connected to an input other than the transceiver's microphone input) If transmitting via AFSK, then in the AFSK sub-panel In the Modulation and transceiver mode panel Uncheck the Reverse panel's transmit and receive boxes Set the Default TxPwer to the RF power output (in watts) that you'll be using On the Main window, set the Operating Mode panel to RTTY If transmitting via AFSK, choose the Soundcard device to be used for transmitting with the PSK & RTTY Reception selector take care to choose a device on the Soundcard connected to your radio. If your Soundcard has multiple inputs, see Multiple-input Soundcards take care to choose a device on the Soundcard connected to your radio.On the Configuration window's Soundcard tab,Ĭhoose the Soundcard device for reception with the PSK & RTTY Reception selector If this option is disabled, applications will be prevented from using any audio device. ![]() If you're using Windows 10, enable Let apps use my microphone in the Settings window's Microphone section. If using AFSK, setup the Soundcard-to-Transceiver Audio connection Setup the Transceiver-to-Soundcard Audio connection Configuring WinWarbler for RTTY OperationĬonfiguration Steps You May Have Already Taken ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |